Polaris P965iQ
Connect to Home Wi-Fi for Access Anytime, Anywhere
SKU #F965IQ
The P965iQ is a 4WD robotic cleaner that provides premium cleaning performance with the convenience of iAquaLink® Control. By connecting to your home’s Wi-Fi network, the P965iQ allows anytime, anywhere access to real-time scheduling programming, and troubleshooting from any smart device using the iAquaLink® app.
Polaris P965iQ Features
Anytime, Anywhere Control
Control of your cleaner wherever you are with the FREE iAquaLink pool control app. The P965iQ Sport connects to your home’s WiFi giving you the capability to clean your pool while at home or on-the-go.
Extra-Large Easy Clean Filter Canister
Never touch debris again! No fuss, no mess — debris can easily be emptied with a simple shake and spray.
Powerful Performance
The P965iQ Sport gets all the dirt and debris in your pool utilizing Vortex Vacuum technology that keeps debris suspended for long-lasting suction and superior cleaning performance.
Patented Easy Lift Removal System
With the touch of a button the P965iQ Sport surfaces to a desired location and waits for you to grab it, then automatically evacuates water for effortless removal from the pool.
Tangle-Reducing Swivel
Helps to provide uninterrupted operation with a low-torque, watertight swivel that prevents cord entanglements so the cleaner can reach every corner of your pool.
Premium Caddy
No tools required! A durable caddy is included to deliver ease of transport and storage.
Polaris P965iQ Specifications
Polaris P965iQ User Guides
Polaris P965iQ Frequently asked questions
- Bright sunlight: Shield the lights to block sunlight and re-check if the lights are lit.
- Control box is unplugged: Plug the control box into a GFCI outlet. (See: Connect to a Power Source).
- Power outage: Verify that the breaker is on and electricity is being supplied to the outlet.
- Lost internet connection: Check internet connection - Network may be down.
- Control box is too far from home router: Relocate the control box as near to the home router as practical. (See: Install and Submerge the Cleaner) Do not use an extension cord.
- Weak Wi-Fi signal: Check for adequate Wi-Fi signal strength. With a Windows laptop, go to Network Connections in the Control Panel. Check Signal Strength meter under Wireless Network Connection icon while standing near the control box. With a smart device, search for, download, and use an app that can check signal strength while standing near the control box. If Wi-Fi signal is weak, consider installing a Wi-Fi extender.
- Unplug your control box and wait 10 seconds. Plug in the box again and see if lights illuminate.
- Check Internet connection - Network may be down.
- Check the canister again to make sure that the mesh screen is not clogged by fine debris. Spray the canister with water if necessary.
- Check the flow outlet screen and remove any debris that may block flow. If the problem persists, contact our Technical Support team at 800-822-7933.
- The filter canister is full or dirty. Clean the filter canister, see "Cleaning the Filter Canister" in manual.
- Sides of pool are slippery or slimy. Although the water seems clear, microscopic algae, invisible to the human eye, are present in the pool. As a result the pool sides become slippery and prevent the cleaner from climbing. Check tires for wear and replace as necessary. Do a shock chlorination treatment and slightly reduce the pH. DO NOT leave the cleaner in the pool during this treatment.
- There is air in the appliance casing. Submerge the cleaner following the procedure in "Submerging the Cleaner" in the manual.
- The filter canister is full or dirty. Clean the filter canister, see "Cleaning the Filter Canister" in manual.
- The brushes have become smooth or the "wear" indicator shows. Replace the brushes following the procedure in "Replacing the Brushes" in the manual.
- Filter canister is full or dirty. Clean the filter canister following the procedure in "Cleaning the Filter Canister" in the manual.
- Make sure the floating cable is spread out over the pool. Ensure the cable is not too tightly wrapped or coiled when storing. If the problem persists, lay the cable straight in the sun to relax it and remove kinks.
- The dirty filter canister lights up when the canister is full or partially clogged. Turn off the cleaner, empty debris, and spray canister to clear fine debris from canister.
- The control unit will reset itself when the dirty canister is replaced with a clean one. Press start/stop button to make sure that the indicator light is off.
- The outlet, the control unit is connected to, is not supplying electrical power. Check that the outlet to which the control unit is connected is receiving electricity.
- Check that you have started one (1) of the two (2) programs and check that the indicator for the selected program is lit. If the indicator light is not lit, turn the wheels then disconnect the control unit and wait at least 20 seconds before reconnecting. If the problem persists, contact Polaris Technical Support at (USA) 1-800-822-7933.
