Polaris Quattro Sport
Debris Doesn't Stand A Chance
SKU #F4TR
Get $125 rebate!Details
Designed to devour debris, the Polaris® Quattro™ Sport boasts 4WD agility to aggressively climb walls and brush the waterline. Even acorns, leaves and pebbles don’t stand a chance thanks to its extra-large intake. And with dual-stage filtration, this cutting-edge pressure-side cleaner collects both fine and large debris into an easy-clean canister with a transparent window. Powered by a booster pump, the Quattro Sport is ideal for all in-ground pool surfaces.
Polaris Quattro Sport Features
Active Brushing
Fine and stuck-on debris are no match for the Polaris Quattro Sport. This pressure cleaner easily tackles the most stubborn debris for a deeper clean, no matter your pool surface.
Aggressive Wall-Climbing
Powerful 4WD agility enables unmatched climbing to ensure superior cleaning from floor to waterline.
Dual-Stage Filtration
From leaves and acorns to sand and silt, the dual-stage filtration system collects both large debris and fine particulates.
Easy-Clean Debris Canister
The large-capacity easy-clean canister makes discarding debris a breeze — simply remove, shake and spray clean. Plus, it features a transparent window so you’ll know instantly when the canister is full.
Extra-Large Debris Intake & Superior Vacuum Power
Easily tackles large debris like acorns, leaves and pebbles thanks to its extra-large debris intake and powerful triple-venturi jet vacuum.
Multi-Directional Navigation
Designed to turn on a dime to ensure quick and efficient cleaning coverage for the entire pool.
Powered by a Booster Pump
Works with a booster pump and helps circulate clean, filtered water throughout the entire pool.
Polaris Quattro Sport Specifications
Polaris Quattro Sport User Guides
Polaris Quattro Sport Frequently asked questions
- Remeasure the hose to verify that it is adjusted to the proper length for the pool shape.
- With the cleaner operating, check that the hose swivels and the hose connections turn freely.
- Ensure the hose is floating and the hose floats are positioned properly. Position the first float (k) up against the feed hose connector (j) and then space hose floats 1-3 ft (30-90 cm) apart.
- Check the wheel RPM. Target wheel speed is 28-32 RPM. If wheel speed is not in target range, refer to Section 7 Adjust Wheel Speed in the manual.
- Straighten the hose assembly by laying it out flat in the sun.
- Check the wheel RPM. Target wheel speed is 28-32 RPM. If wheel speed is not in target range, refer to Section 7 Adjust Wheel Speed.
- Check for debris in the filter canister and clean, if necessary.
- Ensure the hose is floating and the hose floats are positioned properly. Position the first float (k) up against the feed hose connector (j) and then space hose floats 1-3 ft (30-90 cm) apart.
- Adjust the thrust jet. Refer to Section 8 Fine Tuning in the manual.
- Remove unnecessary pool hardware or install a Ladder Guard Kit (part # G21) from a Polaris® dealer.
- Install a Back-Up Valve accessory (part # G62, black or part # G52, white) from a Polaris dealer. Additional hose nuts and swivel may be required. Position the back-up valve and its adjacent hose float 6-8 ft (1.8 - 2.4m) away from the cleaner.
- Ensure the hose length is adjusted to the proper length for the pool shape. Refer to Section 3 Adjust Hose Length in the manual.
- Adjust the thrust jet to improve coverage. Refer to Section 8 Fine Tuning in the manual.
- Check the wheel RPM. Target wheel speed is 28-32 RPM. If wheel speed is not in target range, refer to Section 7 Adjust Wheel Speed in the manual.
- Check for debris in the filter canister and clean, if necessary.
- Check the filter screen and the in-line filter and clean, if necessary.
- Clean the skimmer basket, pump basket, and pool filter.
- Check all of the hoses, connections, and swivels for leaks that could cause loss of water pressure.
- Check the wheel RPM. Target wheel speed is 28-32 RPM. If wheel speed is not in target range, refer to Section 7 Adjust Wheel Speed.
- Ensure the hose is floating and the hose floats are positioned properly. Position the first float (k) up against the feed hose connector (j) and then space hose floats 1-3 ft (30-90 cm) apart.
- Check for debris in the filter canister and clean, if necessary.
- Adjust the thrust jet. Refer to Section 8 Fine Tuning in the manual.
- For smooth surface pools (tile, fiberglass, etc.), replace both rear tires with PosiTrax® tires for more traction (available from a Polaris® dealer).
