Polaris 9400 Sport

The 4-Wheel Drive Polaris 9400 Sport takes Polaris robotic cleaners to the next level

The 9400 Sport provides best-in-class cleaning performance and features. With Vortex Vacuum Technology that enables extraordinary cleaning power without losing suction, the...

The 4-Wheel Drive Polaris 9400 Sport takes Polaris robotic cleaners to the next level

The 9400 Sport provides best-in-class cleaning performance and features. With Vortex Vacuum Technology that enables extraordinary cleaning power without losing suction, the 9400 Sport tackles any pool terrain and climbs over obstacles without getting stuck. The 9400 Sport cleans all pool surface types and scrubs the floor, walls, and tile line with a pleated scrubbing brush. This machine has an all-purpose filter canister that has 4 times the capacity of other similar cleaners. That means fewer filter cleanings (up to 70% less), and lower operating costs (pennies per day).

By engineering the machine with top access large capacity filter canister, debris can easily be emptied with a simple shake and spray convenience. Never touch debris again!

The 9400 Sport is the only Polaris robotic to feature a new 7-day programmable timer, with fully customizable cleaning cycles. Simply set it and forget it. And, its ActivMotion Sensor allows the cleaner to automatically sense its position in the pool and adapt its path for optimized cleaning while reducing cord tangling.

The 9400 also includes a NEW lift system. With the touch of a button the 9400 surfaces to a desired location and waits for you to grab it, then automatically evacuates water for effortless removal from the pool.

The 9400 Sport cleans pools up to 50' in length. It weighs just 16 lbs and includes a new premium, compact transport caddy that can be assembled without tools. Model is backed by a 2 year limited warranty.

Features

  • Vortex Vacuum Technology captures more than four times the debris load of other cleaners
  • Top access, large filter canister has four times the capacity of other similar cleaners
  • 4WD technology cleans pool floor, walls, and scrubs tile line with pleated scrubbing brush
  • Cleans all pool surfaces, pools up to 50 ft. in length, 7 day programmable cleaning cycle
  • Includes lift system and heavy duty matching transport caddy, 2 year limited warranty

Models

Model Description
F9400 Polaris 9400 Sport Robotic Pool Cleaner

Exploded Parts Diagram

Automatic Pool Cleaners

Polaris 9400 Sport Robotic Parts List

Launch our online catalog viewer to review breakout diagrams and part numbers.

Learn More

Frequently Asked Questions

Click a frequently asked question below to see the answer.

Cleaner doesn't climb the pool sides

1. The filter is full or dirty and must be cleaned following the procedure Section 5.1 of the owner's manual, "Cleaning the Filter Canister".
2. Microscopic algae are causing the pool side to become slippery. Do a shock chlorination treatment and slightly reduce the pH. DO NOT leave the cleaner in the pool during this treatment.

Cleaner doesn't stay firmly on the pool bottom.

There is air in the appliance casing so you must submerge the cleaner following the procedure in
Section 4.1 of the owner's manual, "Submerging the Cleaner".

How to connect new control unit to original caddy

1. Position the new control unit over the control unit hook on the caddy.
2. Place the locking plate on top and line up the screw holes. Start both screws prior to tightening completely. Secure the plate using Phillips head screws. Do not over tighten.
3. The transport caddy is now ready to use.

Flashing indicator lights appear just after start (pressing the Power or Cycle button to start cleaner) (<20 seconds).

1. Ensure the floating cable is properly plugged into the control unit.
2. Ensure the cleaner is well sub-merged.
3. Cleaner may need to be reset and start new cycle.
4. Ensure the propeller is turning.
5. Ensure the wheels are turning.

Flashing lights appear during cycle.

If the cleaner is sucking air for 60 seconds the flashing lights appear. Submerge the cleaner following the procedure in Section 4.1 of the owner's manual, "Submerging the Cleaner".

On startup cleaner doesn't move.

1. The outlet, the control unit is connected to, is not supplying electrical power. Check that the outlet to which the control unit is connected is receiving electricity.
2. Check that you have started one (1) of the two (2) programs and check that the indicator for the selected program is lit. If the problem persists, contact your local Polaris service representative.

The cycle 1 and 2 program indicators flash alternately.

1. The brushes have become smooth and you need to replace the brushes following the procedure in Section 5.3 of the owner's manual, "Replacing the Brushes".
2. Filter canister is full or dirty so you must clean the filter canister following the procedure in Section 5.1 of the owner's manual, "Cleaning the Filter Canister".
3. Floating cable is excessively coiled or kinked. Make sure the floating cable is spread out over the pool.

Resources

Polaris 9400, 9300, 9300xi, 9100 Robotic Brochure

Item #: SL1510
File Size: 1397907
Language: EN

Download View Online

Polaris 9300, 9300xi, 9400 I/O Manual

Item #: H0363300
File Size: 2291763
Language: EN

Download View Online

Diagnostic Test Kit for Polaris Robotic Cleaners

Item #: H0510700
File Size: 4610506
Language: EN

Download View Online

Pro Resources

Log in to your Zodiac Premium® account now to get access to pro resources.

Log in Now